How To Calibrate/Reset A Hoverboard ?

Unlocking the full potential of your hoverboard requires proper calibration and occasional resetting. Understanding how to calibrate or reset a hoverboard is crucial for maintaining stability and responsiveness. In this guide, we will walk you through the step-by-step process to ensure optimal performance of your hoverboard.

Hoverboards, also known as self-balancing scooters, have become increasingly popular over the last couple of years as a fun and convenient mode of transportation for kids and adults.

However, we all know that, like any electronic device we use at home, including electric scooters, headphones, laptops, or a smartwatch, hoverboards sometimes may require periodic calibration or resetting to ensure optimal performance.

Whether you, as a hoverboard rider, noticed stability issues – uneven steering – want to start fresh with your hoverboard, the below comprehensice article will provide a step-by-step guide on calibrating or resetting your hoverboard correctly.

1. Understanding Calibration and Resetting

Before diving deep into the process, hoverboard owners must understand the difference between calibration and Resetting, as they are different things with varied outcomes. 

Parvinder Singh, our Tech head, says that calibration involves recalibrating the sensors, including the gyroscope + IR sensor of the hoverboard, to ensure accurate balance and responsiveness. 

He says that Resetting, on the other hand, restores the hoverboard to its factory settings, erasing any customized settings or preferences.

So after looking at the problems or errors with the hoverboard, you may need to perform either calibration or Resetting.

2. Safety First

Before starting the calibration or resetting process, it’s crucial to prioritize safety. Ensure you are in a safe and open space, away from obstacles, vehicles, or pedestrians. 

Wear appropriate safety gear, such as a helmet and knee/elbow pads, to protect yourself from potential falls or accidents.

Also follow the guide to ensure a hassle-free travel experience and understand the regulations and restrictions associated with taking a hoverboard on an airplane.

3. Calibration Process

Step 1: Power Off – We recommend hoverboard riders power off and restart the board. 

Step 2: Level Surface – We advise you to place the hoverboard on a flat and level surface to test it accurately. You must know that it is essential to have a stable surface for accurate calibration. Unlevel surfaces can stall calibration, so you must avoid hoverboard calibration on rocks or grass.  

Step 3: Press and Hold – Press and hold the power button for approximately 5-10 seconds. This action initiates the calibration mode.

Step 4: Tilt Forward and Backward – Also, hoverboard riders must check tilt forward and backward functions. Hold the power button, tilt the hoverboard forward until the front end rises slightly, and then tilt it back until the rear end rises. Repeat this motion a few times.

Step 5: Sideways Tilt – After tilting forward and backward, tilt the hoverboard gently to one side and hold for a few seconds. Then tilt it to the opposite side and hold it again. Repeat this process a few times.

Step 6: Power Off – Once you have completed the calibration process, turn off the hoverboard and turn it back on again. The calibration should be complete, and your hoverboard should now function optimally.

4. Resetting Process

Step 1: Power Off – Start by turning off your hoverboard and ensuring it is entirely switched off. Read the hoverboard manual to turn it off completely.

Step 2: Button Combination – The next step is locating your hoverboard’s reset button. This button is typically found near the charging port or underneath a protective cover. You can use video instructions from the company’s channel or user manual to find the button. You can also use a small tool, like a paperclip or pin, and press and hold the reset button.

Step 3: Power On – While holding the button, turn on the hoverboard. Keep holding the button for approximately 5-10 seconds to reset it.

Step 4: Release the Button – After the designated time mentioned in the user manual of your hoverboard, release the reset button. The hoverboard will power off and then restart automatically.

Step 5: Factory Settings – Once the hoverboard has restarted, it will be reset to its original factory settings, erasing any customized settings or preferences you had previously.

5. Post-Calibration/Reset Testing

After completing the calibration or resetting process, testing the hoverboard in a controlled environment is advisable. Check for improved stability, balanced steering, and responsive control. If you still notice any issues or abnormalities, it may be necessary to consult the manufacturer’s troubleshooting guide or contact customer support for further assistance.

Here are a few additional tips and considerations when it comes to calibrating or resetting your hoverboard:

1. Consult the User Manual: We advise our readers to refer to the user manual that comes with your hoverboard because it gives detailed instructions specific to a model. The manual may include instructions or troubleshooting tips for calibration or resetting particular to your model.
   
2. Battery Level: You need to make sure that before initiating or proceeding with any calibration or resetting process, ensure your hoverboard has a sufficient battery charge so it doesn’t shut down in between the calibration process. Parvinder Singh, Our tech Head, recommends charging the hoverboard while calibrating if your battery is low. A low battery level may interfere with calibration or cause incomplete Resetting.
   
3. Environmental Factors: When calibrating or resetting your hoverboard, ensure you are in a stable environment. You must also avoid uneven surfaces – inclines – slippery areas, as these can affect the accuracy of the calibration process.
   
4. Recalibration Frequency: We also don’t recommend hoverboard enthusiasts calibrate their hoverboards; they can do it frequently if you notice significant issues with stability or control. Generally, it is recommended to calibrate your hoverboard once every few months or when you observe noticeable performance problems.
   
5. Software Updates: Check if any firmware or software updates are available for your hoverboard. Manufacturers may release updates that address performance issues or enhance stability. Follow the instructions provided by the manufacturer to update your hoverboard’s software, if applicable.
   
6. Professional Assistance: If you have followed the calibration or resetting process diligently but continue to experience problems with your hoverboard, it may be best to seek professional assistance. Contact the manufacturer’s customer support or take your hoverboard to an authorized service center for further diagnosis and repairs.
   
7. Maintenance and Care: Regular maintenance and care of your hoverboard can help prevent issues and prolong its lifespan, as verified by our team members who have owned hoverboards for over three years and emphasize keeping it clean and free from any damage. Keep the hoverboard clean, inspect it for visible damage, and ensure all components, such as tires, lights, and connectors, work correctly.

By following these additional tips and recommendations, you can quickly and efficiently optimize the performance and longevity of your hoverboard while ensuring a safe and enjoyable riding experience, whether for kids or adult riders.

Conclusion 

In conclusion, from our standpoint, calibrating or resetting your hoverboard is a straightforward process that can significantly improve its performance and stability – which is good for stability + performance + battery backup + safety + long-term use.

Following the step-by-step guide outlined above, you can ensure that your hoverboard operates optimally, providing a safe and enjoyable riding experience. Remember, regular maintenance and adherence to safety guidelines are crucial to maximizing the longevity and functionality of your hoverboard.